![background image](http://html1.mh-extra.com/html/carrier/truvu-vvtbp-e2/truvu-vvtbp-e2_installation-and-startup-manual_2562518060.webp)
Adjusting the TV-VVTBP-E2 driver properties
TruVu™ VVTBP
-E2
©2022 Carrier.
Installation and Start-up Guide
All rights reserved.
54
Configuration Status
Once all changes are accepted, after applying changes this fields shows
success/fail statuses.
Possible statuses
Description
Success
Address selection successful. It may take a few seconds
to updates in the status table. Please refresh the page to
see the updated status table.
In Progress
This string appears after accepting the changes and
before success/fail messages are appeared. This
message may not appear all the time due to data refresh
rate.
Invalid serial number
format
A serial number that was entered manually has an
invalid format. Correct format example: 01647-20212-
250-160
Device not found
Serial number format is valid, but the device with the
number cannot be located.
Select unused address
If the
New Device Address
is a duplicate, select an
unused address from the drop-down list. To update the
table, click
Accept
after every change.
Unknown Error
Firmware or bus error.
Auto addressed device
When a device that does not have an address is found
on the bus, an unused address in automatically
assigned.
You can select a different address in the
New Device
Address
field, if needed.
To resolve duplicate addresses on Act Net bus
When devices display the error
Duplicate Address on the network
, you can use either of the following methods to
resolve the problem.
•
Method 1: Using the
Act Net Bus Configuration
table
1.
For each duplicate device, enter the
Serial Number
, which you can find on a sticker on the device.
2.
Select a
New Device Address
from the drop-down list.
3.
Click
Accept
.
4.
Verify that there are no longer any
Duplicate Address on the network
errors.
•
Method 2: Reinstalling the devices
1.
Remove all duplicate devices from the bus.
2.
Connect one of the removed devices and wait for the
Act Net Bus Status
table to update.
3.
Chose a unique address for the new device and click
Accept
. Wait until the operation is successful.
4.
Repeat the steps 2 and 3 for the remainder of the removed devices.
5.
Verify that there are no longer
Duplicate Address on the network
errors.
Summary of Contents for TruVu VVTBP-E2
Page 5: ...Document revision history 84...
Page 6: ......
Page 91: ......
Page 92: ...Carrier 2022 Catalog No 11 808 875 01 7 22 2022...