Carrier TruVu VVTBP-E2, Installation And Startup Manual

Page: 7 / 92

TruVu™ VVTBP -E2 ©2022 Carrier.
Installation and Start-up Guide All rights reserved.
1
The TruVu™ Advanced Application C ontroller (part no. TV-VVTBP-E2):
•
Runs 2 control programs
○
a VVT bypass Product Integrated Control (PIC)
○
an optional programmable Zone Controller II program
•
Supports BACnet/IP communications on the 10/100 Ethernet port as a single node in a daisy-chain
configuration or as part of a network using a ring topology
•
Supports DHCP IP addressing
•
Has built-in network diagnostic capture functionality for troubleshooting
•
Has network statistics that can be viewed numerically or as trend graphs
•
Has a built-in static pressure sensor
•
Supports Rnet devices
•
Supports Act Net devices
•
Works with the i-Vu® v7.0 or later system with the latest cumulative patch
•
Provides 4 universal inputs, 3 binary outputs, and 2 analog outputs
The TV-VVTBP-E2, a component of the i-Vu® Control System, maintains supply duct static pressure by regulating
airflow and protects the air source from excessive supply air temperature. It has a built-in static pressure sensor
and actuator, uses a patented flow control algorithm, and mounts directly on the bypass duct damper actuator
shaft.
The TV-VVTBP-E2 PIC control program regulates the supply duct static pressure by controlling one of the following:
•
The system's bypass damper
The controller's damper actuator provides 45 in/lbs (5 Nm) of torque. If the actuator's torque is insufficient,
the TV-VVTBP-E2 can be used to drive an external high-torque actuator.
•
The air source supply fan's variable frequency drive (VFD)
The i-Vu® Control System uses linkage to exchange data between the zone terminals and their air source to form
a coordinated HVAC system. The system's air source controller, zone controllers, and bypass controller are linked
so that their data exchange can be managed by one zone controller configured as the VVT Master.
What is the TV-VVTBP-E2?