![background image](http://html1.mh-extra.com/html/carrier/30hxc-series/30hxc-series_installation-operation-and-maintenance-instructions_2562314008.webp)
8
2 - PRELIMINARY CHECKS
2.1 - Check equipment received
•
Inspect the unit for damage or missing parts. If damage is
detected, or if shipment is incomplete, immediately file a
claim with the shipping company.
•
Confirm that the unit received is the one ordered. Compare
the name plate data with the order.
•
The unit name plate must include the following information:
-
Version number
-
Model number
-
CE marking
-
Serial number
-
Year of manufacture and test date
-
Fluid being transported
-
Refrigerant used and refrigerant class
-
Refrigerant charge per circuit
-
Containment fluid to be used
-
PS: Min./max. allowable pressure (high and low
pressure side)
-
TS: Min./max. allowable temperature (high and low
pressure side)
-
Pressure switch cut-out pressures
-
Unit leak test pressure
-
Voltage, frequency, number of phases
-
Maximum current drawn
-
Maximum power input
-
Unit net weight
•
Confirm that all accessories ordered for on-site installation
have been delivered, and are complete and undamaged.
The unit must be checked periodically during its whole operating
life to ensure that no shocks (handling accessories, tools etc.) have
damaged it. If necessary, the damaged parts must be repaired or
replaced. See also chapter 12 “Standard maintenance”.
ATTENTION: No part of the unit must be used as a walk-way,
rack or support. Periodically check and repair or if necessary
replace any component or piping that shows signs of damage.
The refrigerant lines can break under the weight and release
refrigerant, causing personal injury.
Do not climb on a machine. Use a platform, or staging to work
at higher levels.
Use mechanical lifting equipment (crane, hoist, winch, etc.) to lift
or move heavy components. For lighter components, use lifting
equipment when there is a risk of slipping or losing your balance.
Use only original replacement parts for any repair or component
replacement. Consult the list of replacement parts that
corresponds to the specification of the original equipment.
Do not drain water circuits containing industrial brines, without
informing the technical service department at the installation
site or a competent body first.
Close the entering and leaving water shutoff valves and purge
the unit water circuit, before working on the components installed
on the circuit (screen filter, pump, water flow switch, etc.).
Do not loosen the water box bolts until the water boxes have
been completely drained.
Periodically inspect all valves, fittings and pipes of the refrigerant
and hydronic circuits to ensure that they do not show any
corrosion or any signs of leaks.
It is recommended to wear ear defenders, when working near
the unit and the unit is in operation.
Summary of Contents for 30HXC Series
Page 49: ......