Carl Valentin DYNACODE Operating Manual Download Page 88

Page: 88 / 116

Error correction

Dynacode series

88 Operating

manual

10.15

Error message

Cause

Remedy

14 Field

numer

Received line number is invalid
at RS-232 and Centronics.

Check sent data.

Check connection PC - printer.

15 Length

mask

Invalid length of received mask
statement.

Check sent data.

Check connection PC - printer.

16 Unknown

mask

Transferred mask statement is
invalid.

Check sent data.

Check connection PC - printer.

17 Missing

ETB

No end of data found.

Check sent data.

Check connection PC - printer.

18 Invalid

character

One res. several characters of
the text is res. are not available
in the selected font.

Change text.

Change font.

19 Invalid

statement

Unknown transferred data
record.

Check sent data.

Check connection PC - printer.

Invalid check digit

For check digit control the
entered res. received check
digit is wrong.

Calculate check digit anew.

Check code data.

Invalid SC number

Selected SC factor is invalid for
EAN res. UPC.

Check SC factor.

Invalid number of
digits

Entered digits for EAN res.
UPC are invalid

< 12; > 13.

Check number of digits.

23 Check

digit

calculation

Selected check digit calculation
is not available in the bar code.

Check calculation of check
digit.

Check bar code type.

24 Invalid

extension

Selected zoom factor is not
available.

Check zoom factor.

25 Offset

sign

Entered sign is not available.

Check offset value.

26 Offset

value

Entered offset value is invalid.

Check offset value.

27 Printhead

temperature

Printhead temperature is too
high.

Defective printhead sensing
device.

Reduce contrast.

Change printhead.

28 Cutter

error

With cut an error occurred.

Paper jam.

Check label run.

Check cutter run.

29 Invalid

parameter

Entered data do not correspond
to the characters allowed from
the application identifier.

Check code data.

Summary of Contents for DYNACODE





















































































































Search results

Summary of Contents for DYNACODE

Reviews:

Related manuals for DYNACODE

Brands by name

Popular brands

Carl Valentin DYNACODE, Operating Manual

Search results

Summary of Contents for DYNACODE

Reviews:

Related manuals for DYNACODE

Brands by name

Popular brands