Carl Valentin DYNACODE, Operating Manual

Page: 59 / 116

Dynacode series Function menu
10.15 Operating manual 59
7.10 I/O parameters
Press key to access the function menu.
Press key as long as you arrive at the 'I/O parameters' menu.
Press key to select the menu.
IN signal level:
Indication of signal at which a print order is started.
+ = active signal level is 'high' (1)
− = active signal level is 'low' (0)
x = not activated signal level
s = status can be affected by interface
*
The modification of the signal level is only taken into consideration for
the operating modes I/O static, I/O dynamic, I/O static continuous and
I/O dynamic continuous.
Press key
to arrive at the next menu item.
OUT signal level:
Indication of signal level for output signal.
+ = active signal level is 'high' (1)
− = active signal level is 'low' (0)
s = status can be affected by interface*
Press key to arrive at the next menu item.
Debounce:
Indication of debounce time of the dispenser input. The setting range
of the debounce time is between 0 and 100 ms.
In case the start signal is not clear then you can debounce the input
by means of this menu item.
Press key
to arrive at the next menu item.
Start signal delay:
Indication in time per second of the delay for the start signal.
Value range: 0.00 … 9.99.
Press key
to arrive at the next menu item.
Error if not ready:
On:
If a print order is active but the direct print module is not ready to
process the order (e.g. if it is already in 'printing' mode), then an error
message appears.
Off:
No error message appears.
Press key to arrive at the next menu item.
Ready while printing:
Indication if the output signal 'print ready' (Out 5, Output II) remains
active while printing.
Off:
At print start the 'print ready' signal is inactive (default setting).
On:
At print start the 'print ready' signal remains active.
*
in combination with Netstar PLUS