Carl Valentin DYNACODE, Operating Manual

Page: 65 / 116

Dynacode series Function menu
10.15 Operating manual 65
Press key
to arrive at the next menu item.
BrkPow:
Adjustment of brake power for acceleration and braking in %.
BrkPowP:
Adjustment of brake power during printing.
Press key
to arrive at the next menu item.
Print examples:
Settings:
Printout of all settings such as speed, and transfer ribbon
material.
Bar codes:
Printout of all available bar code types.
Fonts:
Printout of all available font types.
Press key to arrive at the next menu item.
Input/Output:
Indication of signal level which indicates the signal a print order is
started.
0 - Low; 1 - High
Press key
to arrive at the next menu item.
Diagnostic:
Press key to access the diagnostic menu.
Encoder Profiling:
The encoder values with print start in logging files are registered on
CF card. By means of this data, a graphic chart of the encoder curve
can be created.
For further information please contact our support department.
Press key
to arrive at the next menu item.
Diameter of transfer ribbon rolls:
DiaRW
= Diameter of transfer ribbon rewinding roll.
DiaRU
= Diameter of transfer ribbon unwinding roll.
Taste to arrive at the next menu item.
Encoder average:
Number of values by which the encoder signals is averaged. The
more higher the value the more slowly react the device to speed
modifications.
Press key
to arrive at the next menu item.
Diagnostic - Counter:
Relevant results are counted and registered in RAM memory. The
protocole get lost after switching off the device.
IgnrStrt
= Counter for ignored start signals.
IntPrts
= Counter for cancelled print orders.