Carl Valentin APL 100, Operating Manual

Page: 9 / 58

Applicator APL 100 Safety Instructions
11/13 Operating Manual 9
2.2 Operating Conditions
Before initial operation and during operation
these operating
conditions have to be observed to guarantee save and interference-
free service of our printers.
Therefore please carefully read these operating conditions.
Shipment and storage of our printers are
only
allowed in original
packing.
Installation and initial operation of printer is only allowed if operating
conditions were
fulfilled
.
Commissioning is prohibited until it can be established that, where
relevant, the machine into which the partly completed machinery is to
be incorporated complies with the provisions of Machinery Directive
2006/42/EC.
Initial operation, programming, operation, cleaning and service of our
printers are only recommended after careful study of our manuals.
Operation of printer is only allowed by especially trained persons.
NOTICE!
Perform trainings regularly.
These indications are also valid for someone else's equipment
supplied by us.
Only use original spare and exchange parts.
CPU of printer is equipped with a lithium battery (type CR 2032) for
which the battery regulation is to apply. This regulation plans that
unloaded batteries have to be given to used battery collecting
containers of trade and public carries. In case that batteries were not
completely discharged you have to make arrangements for short-
circuits. At a shutdown of printer the battery has to be disposed in
either case separately from printer.
DANGER!
Danger of life by explosion!

Use non-conducting tools.
The installation place of printer should be even, free of vibration and
currents of air are to be avoided.
The printers have to be installed to ensure optimal operation and
servicing.
Instructions for
lithium battery
Conditions for
installation place