Component replacement and adjustment procedure
7.25
Light bulb substitution
Figure 1
1.
Disconnect the power supply cord and remove the Oven from the
cabinet.
2.
Remove the upper, rear and lateral cover .
3.
Open the glass lens to access to bulb as showed
(fig. 1)
.
4.
Replace the new one by reversing the previous steps.
5.
The insulation around the lamp must be properly located, it must
not cover the lamp cavity holes.
6.
NOTE: The lens it must be in contact with cavity holes.
7.
Reinstall the Oven into the cabinet.
8.
Reconnect the power supply cord after the Oven is installed.
9.
Run the Oven and check all functions and microwave emission
(section 1.2).