Component replacement and adjustment procedure
7.19
Fuse substitution
Figure1
Figure 2
1.
Disconnect the power supply cord
and remove the Oven from the
cabinet.
2.
Remove the upper cover.
3.
Remove the internal components
cover
(fig 1)
by its six screws.
4.
Open the fuse holder and remove the
fuse damaged from the metal clamps
(fig.2)
5.
Replace the new one by reversing
the previous steps.
6.
Connect the terminals. The
connections must not be loose.
7.
Reinstall the Oven into the cabinet.
8.
Reconnect the power supply cord
after the Oven is installed.
9.
Run the Oven and check all functions
and microwave emission
(section
1.2).