Component replacement and adjustment procedure
7.4
Convection fan motor substitution
Figure 1
1.
Disconnect the power supply cord and remove the
Oven from the cabinet.
2.
Remove the upper, rear and lateral covers.
3.
Disassemble the brackets by removing their three
screws each
(fig.1).
4.
Remove the back support by removing the last two
screws on the top
(fig.1).
5.
Remove the fan blade by using a 10mm socket
(fig.2), than remove the fan damaged by its three
external screws
(fig.1).
6.
Disconnect the terminals on the fan in the rear side.
7.
Mount the new fan motor with the screws and then
mount also the fan blade.
8.
Replace the back support.
9.
Connect the terminals.
10.
The connections must not be loose.
11.
Reinstall the Oven into the cabinet.
12.
Reconnect the power supply cord after the Oven is
installed.
13.
Run the Oven and check all functions and
microwave emission
(section 1.2).
Figure 2