Component replacement and adjustment procedure
7.9
Lock door switch substitution
1.
Disconnect the power supply cord and remove the Oven from the
cabinet.
2.
Remove the upper, rear and lateral cover .
3.
Disconnect the terminals of micro switch.
4.
Remove the plastic support performing the two movements as
showed in the figure.
5.
Replace the new one by reversing the previous steps.
6.
Connect the terminals.
7.
The connections must not be loose.
8.
Reinstall the Oven into the cabinet.
9.
Reconnect the power supply cord after the Oven is installed.
10.
Run the Oven and check all functions and microwave emission
(section 1.2).