Component replacement and adjustment procedure
7.18
Electronic Control board substitution
Fig.1
1.
Disconnect the power supply cord and remove the
Oven from the cabinet.
2.
Remove the upper cover.
3.
Disconnect the bad Control Board and remove it by
its four plastic bracket.
(fig.1)
4.
Replace the new one by reversing the previous
steps.
5.
Connect the terminals. The connections must not be
loose.
6.
Reinstall the Oven into the cabinet.
7.
Reconnect the power supply cord after the Oven is
installed.
8.
Run the Oven and check all functions and
microwave emission
(section 1.2).