Component replacement and adjustment procedure
7.12
Transformer substitution
Figure1
Figure 2
1.
Disconnect the power supply cord and remove the
Oven from the cabinet.
2.
Remove the upper cover.
3.
Remove the internal components cover
(fig 1)
by
its six screws.
4.
Disconnect the cable of transformer damaged and
unscrew it by 4 base screws.
(fig.2).
5.
Replace the new one by reversing the previous
steps.
6.
Connect the terminals. The connections must not
be loose.
7.
Reinstall the Oven into the cabinet.
8.
Reconnect the power supply cord after the Oven
is installed.
9.
Run the Oven and check all functions and
microwave emission
(section 1.2).