Component replacement and adjustment procedure
7.17
Filter substitution
Figure 1
1.
Disconnect the power supply cord and
remove the Oven from the cabinet.
2.
Remove the rear cover.
3.
Disconnect the cable from filter damaged
and unscrew it by its base screws.
(fig.1)
4.
Replace the new one by reversing the
previous steps.
5.
NOTE: for correct connection see the
schematic label on filter.
6.
Connect the terminals. The connections
must not be loose.
7.
Reinstall the Oven into the cabinet.
8.
Reconnect the power supply cord after the
Oven is installed.
9.
Run the Oven and check all functions and
microwave emission
(section 1.2).