Component replacement and adjustment procedure
7.24
Glass Control panel substitution
Fig.1
1.
Disconnect the power supply cord and remove the Oven from the cabinet.
2.
Remove the upper cover.
3.
Remove the Control Board without disassembling the cable.
(section 7.18)
4.
Substitute the glass damaged by removal of the four screws on metal brackets.
(fig.1)
5.
Replace the new one by reversing the previous steps mounting also a new
plastic control board brackets.
(fig.2)
6.
Reinstall the Oven into the cabinet.
7.
Reconnect the power supply cord after the Oven is installed.
8.
Run the Oven and check all functions and microwave emission
(section 1.2).
Fig.2