Canon VB150 User Manual Download Page 75

Page: 75 / 120

VB Administr

ation

ools

View Restriction Tool

Apply the view restriction

View restriction settings are applied when this item is selected.

View Restriction Value Input boxes and Get Value button

The view restriction settings can be edited by entering values in the View Restriction Value

Input boxes. When the Get Value button is clicked, current angle of the camera selected

with this tool can be retrieved and reflected in each setting value listed below.

●

View restriction setting values

Upper value ... Value for the upper limit of the view restriction. The upper value of the

selected camera angle is obtained using the Get Value button.

Lower value ... Value for the lower limit of the view restriction. The lower value of the

selected camera angle is obtained using the Get Value button.

Left value ....... Value for the left limit of the view restriction. The left value of the selected

camera angle is obtained using the Get Value button.

Right value .... Value for the right limit of the view restriction. The right value of the

selected camera angle is obtained using the Get Value button.

Telephoto ...... Value for the telephoto limit of the view restriction. The zoom value of the

selected camera angle is obtained using the Get Value button.

Wide-angle .... Value for the wide-angle limit of the view restriction. The zoom value of

the selected camera angle is obtained using the Get Value button.

Apply button

Sends to the VB150 the current view restriction settings edited with this tool. You can go

to the next camera settings by clicking this Apply button. At this stage, the edited settings

are not yet saved to the VB150. Be sure to click the Save Settings button to save the

settings to the VB150.

Preview button

Clicking this button allows checking of the set values specified in the View Restriction

Value Input boxes with the View Restriction Preview frame.

Admin Viewer button

This button can be used to start up Admin Viewer.

Status List

Displays the results of communication between this tool and the VB150. Warning

messages are displayed in blue and error messages are displayed in red.

Note

Edited content will not be reflected in the viewer accessed to the VB150 at the

stage when the Apply button is clicked. After confirming the edited content,

be sure to click the Save Settings button to save the settings to the VB150.

Summary of Contents for VB150

























































































































Search results

Summary of Contents for VB150

Reviews:

Related manuals for VB150

Brands by name

Popular brands

Canon VB150, User Manual

Search results

Summary of Contents for VB150

Reviews:

Related manuals for VB150

Brands by name

Popular brands