Canon VB150 User Manual Download Page 16 | Manualshive

Page: 16 / 120

background image

Features of the VB150

The VB150 is a system that distributes live video via the Internet or an intranet. It can be used in a wide

variety of applications such as distributing live video from a Web site or monitoring.

■

WebView Livescope built in

The VB150 comes with Canon’s own WebView Livescope network video distribution system built

in.

■

Broadband video distribution function

Video can be captured at a maximum of 30 fps. Motion-JPEG is used to compress the video

images. The network auto negotiates between Ethernet 100 Mbps and 10 Mbps. Also, a wireless

LAN card can be used for IEEE 802.11b-compliant 11 Mbps communication. If a PC card modem

is used, the public switched telephone network can also be used. Since video quality (1-99) and

the frame rate (0.1-30 fps) can be freely set, video can be distributed under conditions that best

suit the network bandwidth.

■

Simultaneous video reception by up to 50 clients

Up to 50 clients can view video simultaneously with a single VB150 unit.

■

Remote camera control from the viewer *

Two types of viewer software are provided: Viewer for PC and Viewer for Java. These viewers
can be used to freely control the angle (pan and tilt) and the zoom magnification of cameras

installed in a remote location, enabling viewing videos with plenty of ambiance.

■

Compatible with the Communication Cameras

VC-C50i/VC-C50iR (new function of firmware Ver. 1.1)

In addition to being compatible with the previous VC-C4/VC-C4R and NU-700, it
is now also compatible with the new VC-C50i/VC-C50iR.

■

Control for up to 4 cameras

Up to 4 video cameras can be connected to the VB150, and videos that you view can be switched
from the viewer. If the Communication Cameras VC-C50i/VC-C50iR and VC-C4/VC-C4R are used,
all four cameras can be controlled (using the cascade function of the VC-C50i/VC-C50iR and the
VC-C4/VC-C4R).

■

Compatible with wireless LANs

A wireless LAN card can be used to connect the VB150 to a network.

■

Compatible with various networks (new function of firmware Ver. 1.1)

In addition to operating the VB150 with previous fixed IP addresses, it is now also compatible with
PPPoE, and when an ADSL circuit is used, the VB150 can be operated by connecting to the
ADSL modem and bypassing the router.

■

Motion-detection based picture recording

The VB150 can detect image changes caused by moving people or objects, perform external
device output and record pictures.

15

«
...
14
15
16
17
18
...
»

Summary of Contents for VB150

























































































































Reviews:

No comments

Related manuals for VB150

Brand: F-SECURE Pages: 19

Brand: IBM Pages: 32

DR-4100P Series

Brand: Idis Pages: 30

Brand: Xinje Pages: 57

Brand: XAVI Technologies Corp. Pages: 71

NetStructure ZT 5515

Brand: Intel Pages: 90

Brand: Belkin Pages: 72

Brand: Helmholz Pages: 28

Brand: Usr Pages: 2

Protege PRT-PX16-PCB

Brand: ICT Pages: 34

ADSL 2/2+ VPN Firewall Router ADE-4300A/B

Brand: Planet Pages: 132

iCE40 SPRAM Series

Brand: Lattice Semiconductor Pages: 12

Brand: Idis Pages: 16

Brand: ZIMO Pages: 13

Brand: ZyXEL Communications Pages: 3

Brand: IBM Pages: 64

Mustang-M2AE-MX1

Brand: IEI Technology Pages: 58

24-Port 1000BASE-T

Brand: Comet Labs Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands