Canon VB-R13VE H2 Manual Download Page 169

Page: 169 / 260

Setting Page

151

[External Device Output for Active Event]

Select the actions of external device output when an active event is triggered.

[External Device Output for Inactive Event]

Select the actions of external device output when an inactive event is triggered.

[Audio Playback at Active Event]

If you select [Enable], the sound clip specified in [Sound Clip] will play back at active events for the external device input.

[Audio Playback at Inactive Event]

If you select [Enable], the sound clip specified in [Sound Clip] will play back at inactive events for the external device input.

[Sound Clip]

Select the sound clip when [Audio Playback at Active Event] or [Audio Playback at Inactive Event] has been set to

[Enable].

You must register the sound clip with Sound Clip Upload 1 to 3 (P. 137) in [Video and Audio] > [Audio] in advance.

[Volume]

Enter the volume for the sound clip.

[Day/Night Mode Switching]

Select the Day/Night Mode switching behavior when an external device input event is triggered.

When [Switch to Day Mode] is set, switches to Day Mode when an active event is triggered, and switches to Night Mode

when an inactive event is triggered.

When [Switch to Night Mode] is set, switches to Night Mode when an active event is triggered, and switches to Day Mode

when an inactive event is triggered.

Important

• When [Camera] > [Initial Settings] > [Day/Night] is set to [Auto] (P. 105), [Day/Night Mode Switching] will not happen when an external

device input event is triggered.

• When the [Day/Night Mode Switching] settings switch Day/Night Mode, camera control privileges are released, even if the user has

obtained those camera control privileges using the Camera Viewer or other camera control applications.

HM4x H730

Summary of Contents for VB-R13VE H2





































































































































































































































































Search results

Summary of Contents for VB-R13VE H2

Reviews:

Related manuals for VB-R13VE H2

Brands by name

Popular brands

Canon VB-R13VE H2, Manual

Search results

Summary of Contents for VB-R13VE H2

Reviews:

Related manuals for VB-R13VE H2

Brands by name

Popular brands