Canon VB-R13VE H2, Manual

Page: 15 / 260

xv
Cleaning the Dome Cover, Top Cover, and Lens Protector
1 Wash off foreign substances such as dust and sand using clean water*.
* Since indoor cameras (VB-H730F Mk II, VB-S30D Mk II, VB-S800D Mk II, VB-S805D Mk II, VB-R13, VB-R11, VB-H651V,
VB-M641V, and VB-M640V) cannot be directly washed with water, wipe them clean with a soft cloth that has been
dampened with clean water.
2 If the lens protector is dirty with something that cannot be removed with water, such as fingerprints or oil, gently
wipe the lens protector clean with a soft sponge or cloth dampened with a neutral dishwashing detergent diluted
to approximately 1% with water.
3 Wipe them clean with a soft cloth that has been dampened with clean water to ensure that water droplets and
detergent do not remain**.
** For the VB-H761LVE-H, VB-H751LE-H, VB-M741LE-H, use clean water (water from the faucet, etc.) to rinse off the
detergent and let it dry naturally.
The hydrophilic coating models have a "hydrophilic coating model label" attached on the product's exterior cover.
Cleaning the Lens
Use a commercial lens cleaner to remove grime on the lens surface.
• Scratches on the lens surface may result in poor video capture.
• Auto focus functionality may be degraded if the lens surface is dusty or dirty.
Important
By performing an incorrect cleaning method, the dome cover or top cover, or lens protector could become scratched and will
need to be replaced for a fee. Therefore, follow the next set of instructions carefully.
• Because of dust, dirt, or fingerprints etc. the auto focus may not work properly or the reflection of backlight or infrared light
causes the image to become white and cloudy. In order to preserve the level of image quality, it is necessary to regularly clean
the protective window.
• Do not wipe with a dry cloth. Never wipe with a cloth especially without removing the attached grime.
This may result in scratches to the dome cover, top cover and/or lens protector.
• Use caution for the following points for the hydrophilic coating models.
– Sponges and cloths used for cleaning, even if new, can have impurities adhered to it and can lower the effect of the
coating. Therefore, use it after washing the sponge or cloth with a neutral dishwashing detergent.
– Spraying with spray bottles can deteriorate the coating effect due to impurities such as lubricants. Therefore, we advise not
to use spray bottles.
"hydrophilic coating model label"