Canon VB-R13VE H2, Manual

Page: 109 / 260

Setting Page
5
91
General video settings, such as the size and quality of JPEG and H.264 video transmitted from the camera.
[Video] is common with [Video] found in [Video and Audio] and [Video Record]. A setting configured in any of the [Video]
submenus will be reflected in the other [Video] submenus as well.
All Videos
Set the video size sets used by the camera.
All options in the [Video] submenu and the size sets that can be selected in [Video Size] in all of the Setting Pages are
determined by the video size set selected here.
This also determines the video sizes and screen sizes that can be selected by each Viewer.
[Video Size Set]
Categories and aspect ratios vary according to each video size set.
* For VB-M44, VB-S805D Mk II and VB-S905F Mk II, [1920 x 1080 / 960 x 540 / 480 x 270] cannot be set for [Video Size Set].
[Basic] > [Video]
Setting Video Size and Quality
Important
• The following may occur if video size, video quality and target bit rate are set higher, as this increases network load and data size per
frame.
– JPEG: The frame rate may drop
– H.264: Video may be temporarily disrupted
• In case of H.264 video, block noise may become noticeable if a large video size and low target bit rate are set.
• The data size may increase depending on the type or movement of the subject. If the frame rate remains low or other undesirable
conditions continue for a prolonged period, lower the video size or quality setting.
• The RM-Lite can only record JPEG video.
[Video Size Set] Category Aspect Ratio
[1920 x 1080 / 960 x 540 / 480 x 270]* 1080p 16:9
[1280 x 720 / 640 x 360 / 320 x 180] 720p 16:9
[1280 x 960 / 640 x 480 / 320 x 240] 4:3 4:3
The following settings can be configured here.
• All Videos
• JPEG
• H.264(1)
• H.264(2)