Canon VB-R13VE H2, Manual

Page: 12 / 260

xii

List of Factory Default Settings
The setting values for the factory default settings are changed as indicated below.
Note
Since cameras with the factory default settings are configured to obtain an IP address from the DHCP server, detect the camera by
Camera Management Tool using a DHCP environment or an IPv6 environment. If you configure the settings using other
environments, please refer to "Operation Guide" > "Setting up the network without a DHCP server".

Setting Name Changes
Note
Setting names other than the following may also have been changed, depending on the model you are using.
The setting name of [Bit Rate Control] has been changed in [Basic] > [Video] > [H.264(1)] and [H.264(2)].
• [Use bit rate control] changed to [Use bit rate control (constant bit rate)]
• [Do not use bit rate control] changed to [Do not use bit rate control (variable bit rate)]
Item Before Change After Change
• IPv4
IPv4 Address Settings Method
Manual Auto (DHCP)
• DNS
Set Name Server Address Automatically
Disable Use DHCP/DHCPv6
• Administrator Account
Administrator Name
Password
With setting values Without setting values
• User Authority
Guest User Camera Control
Video distribution and
Camera control
No access privileges
• User Authority
Guest User Audio Distribution
Yes No
• Camera Name
Camera Name (alphanumeric characters)
Camera Model Name (Example) VB-M50B
• Camera Settings
Focus
Manual Auto
• Camera Settings
Day/Night
Day Mode Auto
• Memory Card Operations
Overwrite videos
Disable Enable