Canon Vb-C60 - Ptz Network Camera Operation Manual Download

Page: 15 / 198

Top Page of the Camera

Note

If the Administrator and Authorized User are sharing VB-C60 Viewer on the same PC, it is

strongly recommended that the [

Remember my password

] check box be cleared.

If a wrong user name or password is entered, the camera cannot be connected. Connect

the camera by entering the correct user name and password.

If you have forgotten the Administrator Password, press the reset switch to initialize the

settings. See "Initializing with the Reset Switch on the Camera" ( P. 5-21).

Take note,

however, that this will reset all settings of the camera, except for time and date, to their

factory settings.

Tip

For details on VB-C60 Viewer and user types, see "Overview of VB-C60 Viewer" in "Chap ter 3

VB-C60 Viewer" ( P. 3-2).

COP

Summary of Contents for Vb-C60 - Ptz Network Camera







































































































































































































Search results

Summary of Contents for Vb-C60 - Ptz Network Camera

Reviews:

Related manuals for Vb-C60 - Ptz Network Camera

Brands by name

Popular brands

Canon Vb-C60 - Ptz Network Camera, Operation Manual

Search results

Summary of Contents for Vb-C60 - Ptz Network Camera

Reviews:

Related manuals for Vb-C60 - Ptz Network Camera

Brands by name

Popular brands