2-16
View Restriction Setting Tool
(4) [Model]
The model of the connected camera is displayed.
(5) [Apply the view restriction]
To use view restrictions, select this check box.
(6) View restriction setting entry boxes and [Get value] button
You can enter a value in each view restriction setting entry box to change the applicable
setting.
You can load the current camera angle into each setting by clicking the [
Get value
] button.
●
View restriction settings
[
Upper limit
] ...Top limit of the view restriction. Use the [
Get value
] button to acquire the top
edge value of the viewing angle.
[
Lower limit
]....Bottom limit of the view restriction. Use the [
Get value
] button to acquire the
bottom edge value of the viewing angle.
[
Left limit
] .......Left limit of the view restriction. Use the [
Get value
] button to acquire the left
edge value of the viewing angle.
[
Right limit
] .....Right limit of the view restriction. Use the [
Get value
] button to acquire the
right edge value of the viewing angle.
[
Telephoto
] .....Telescopic limit of the view restriction. Use the [
Get value
] button to acquire
the zoom ratio of the viewing angle.
[
Wide-angle
] ..Wide angle limit of the view restriction. Use the [
Get value
] button to acquire
the zoom ratio of the viewing angle.
(7) [Apply] button
Apply the current view restriction settings to this camera. At this point, the settings are not yet
saved in the camera. Be sure to click [
Save view restriction settings
].
(8) [Preview] button
Reflect the settings in the view restriction setting entry boxes in the view restriction preview
frame.
(9) [Admin Viewer] button
Launches Admin Viewer.
(10) Status List
The results of operations performed with this tool are displayed.
Warning messages are shown in blue, while error messages are shown in red.
COP
Y