2-28
Preset Setting Tool
5.
Click [Apply].
Check the status list to make sure the settings have been applied correctly, and then click the
[
Save preset settings
] button to save the settings in the camera.
Note
z
The preview based on the panorama preview function may vary slightly from the actual
image. After setting a preset, be sure to confirm with Admin Viewer that the preset has
been reflected correctly.
z
To apply the manual focus mode, manually adjust the focus while checking the actual
image using Admin Viewer. After the focus has been adjusted, set the focus using the [
Get
value
] button.
z
If the image stabilizer setting is changed after a preset has been set, the set viewing angle
will no longer agree with the viewing angle during operation ( P. 3-22). If the image
stabilizer setting has been changed, check the preset settings again.
z
If a dome housing is used, be sure to set presets with the dome installed.
z
If the camera mounting method has been changed, set presets again.
Tip
z
Up to 20 presets can be set.
z
Changes to preset settings are not reflected in the connected viewer.
z
You can disable presets in VB-C60 Viewer by selecting the [
24) check box.
z
Preset positions cannot be set in the digital zoom area.
z
You can also set multiple presets and save them all at once using the [
Save preset settings
]
button.
COP
Y