Canon Vb-C60 - Ptz Network Camera Operation Manual Download Page 174

Page: 174 / 198

5-10

List of Log Messages

A120 Resolution of upload destination name failed [notice]

A121 Connection to upload destination failed [notice]

A122 Connection to upload destination failed [notice]

A130 Stream recording buffer recovered [notice]

A134 Invalid upload setting (FTP/HTTP mode) [notice]

A135 Invalid upload setting (FTP PORT/PASV mode) [notice]

A136 Invalid upload setting (HTTP notification only/image mode) [notice]

Description

uploader cannot resolve the server name (A120)

Meaning

The name of the upload destination could not be resolved.

Description

uploader cannot connect to the server (A121)

Meaning

The upload destination could not be connected ( ).

Description

uploader cannot connect the server (A122)

Meaning

The upload destination could not be connected due to a reason other than

A120 and A121.

Description

stream buffer recovered - lost=<Number of destroyed frames> (A130)

Meaning

The image buffer for stream recording has recovered.

Description

ftp/http mode invalid. uploader set <none> forcibly (A134)

Meaning

The upload mode setting is invalid. The upload function was forcibly

disabled.

Description

ftp port/pasv mode invalid. uploader set <pasv> forcibly (A135)

Meaning

The PORT/PASV mode setting in connection with FTP upload is invalid. The

PASV mode was forcibly set.

Description

http notice/image mode invalid. uploader set <image> forcibly (A136)

Meaning

The notification only/image mode setting in connection with HTTP upload

is invalid. The image mode was forcibly set.

COP

Summary of Contents for Vb-C60 - Ptz Network Camera







































































































































































































Search results

Summary of Contents for Vb-C60 - Ptz Network Camera

Reviews:

Related manuals for Vb-C60 - Ptz Network Camera

Brands by name

Popular brands

Canon Vb-C60 - Ptz Network Camera, Operation Manual

Search results

Summary of Contents for Vb-C60 - Ptz Network Camera

Reviews:

Related manuals for Vb-C60 - Ptz Network Camera

Brands by name

Popular brands