background image

1-17

Setting the Camera Control and External Device Name (Camera)

1

1

D

etailed Settings

Tip

z

Auto focus may not work properly with the following subjects: 

z

The focus ranges (rough guide) are shown in the table below according to the settings of 

[

Day/Night

], etc

.

z

When it is difficult to focus on a night view or other subject having no contrasting bright/

dark areas, it is best to set the focus mode to "Fixed at infinity."

A white wall or other subject 
having no contrasting 
bright/dark areas 

A slanting subject

A subject reflecting 
strong light 

A subject consisting 
only of slant lines or 
horizontal stripes 

A subject having no 
form, such as flame 
or smoke 

A subject seen 
through glass 

A fast-moving 
subject 

A dark area or night 
view 

A subject that is 
simultaneously far and 
near 

Point of infinity

N

ote) The camera may 

b

e o

u

t of foc

u

s.

Day/

N

ight setting

Day mode

N

ight mode

Dome

Infrared lamp

W

ide end

Tele end

W

ide end

Tele end

A

u

to

N

ot 

u

sed

N

one

0.3m~

1.5m~

0.5m~

1.

8

m~

Used

N

one

2.1m~

2.4m~

N

ot 

u

sed

Yes

0.5m~

1.

8

m~

Used

Yes

0.5m~

2.4m~

Fixed at infinity

N

one

Point of infinity

Yes

COP

Y

Summary of Contents for Vb-C60 - Ptz Network Camera







































































































































































































Reviews: