Canon varioPRINT 600 TITAN Series, Service Manual, Page: 77 / 87

Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series Service Guide April 2021
Revision 1 Page 71
Table 63 – Book Stacker (for the Booklet Maker) Specifications
Item Specifications
Required Equipment Booklet Maker
Stacker Capacity
Approximately 36.6” (930 mm) this is approximately
Booklets Sheets/pages per booklet Spine Thickness
400 booklets up to 10 sheets/40 pages 2 mm
175 booklets up to 25 sheets/100 pages 5 mm
80 booklets up to 50 sheets/200 pages 10 mm
Book Sizes
•
Spine Length: Minimum: 4.7” (120 mm), Maximum: 14.6” (370 mm)
•
Book Width: Minimum: 3.15” (80 mm), Maximum: 10.2” (260 mm)
•
Book Thickness: Minimum: 4-page booklet (dependent on media),
Maximum: 200 page booklet 0.39” (10 mm)
Power Source
From the Booklet Maker.
Dimensions (W x D x H)
Book Stacker:
Approximately 49.2” x 53.1” x 40.6” (1,250 mm x 1,350 mm x
1,030mm)
and the Book Stacker:
Approximately 95.3” x 69.7” x 52.4” (2,420 mm x 1,770 mm x 1,330
mm)
Weight Approximately 330 lb (150 kg)
Table 64 – Watkiss 2-Knife Trimmer (for the Booklet Maker)
Specifications
Item Specification
Required Equipment Booklet Maker
Book Size
Minimum book size: 4.72” x 3.15” (120 mm x 80 mm)
Maximum book size: 14.96” x 12.2” (380 mm x 310 mm)
Book Thickness
Maximum book thickness: .41” (10.4 mm)
(approximately 200 pages 80 g/m
2
)
Minimum book thickness: 1 sheet folded to make an 4-page booklet
Trimming
Minimum trim width: : 4.72” (120 mm)
Maximum trim width: 14.96” (380 mm) no trim; 14.88” (378 mm) trimmed
Maximum side trim: 1.57” (40 mm) each side
Minimum side trim: 0.039” (1 mm) each side
The trim can be offset from the center line by a maximum of 1.57” 40
mm, depending on the amount of side trim
Power Source Single Phase 200-240V, 50/60 Hz, 5 A
Dimensions
(W x D x H)
Approximately 36.4” x 45.0” x 38.1” (924 mm x 1,142 mm x 968 mm)
Weight Approximately 661 lb (300 kg)