Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series
Service Guide
April 2021
Revision 1
Page 47
3. KOM Program Actions
Table 39 – Key Operator Part Replacement
Action
KOM
eKOM
Remarks
Replace the OPC Belt
Replace the TTF Belts / LWM TTF Belts
Replace the TTF Spiral Cleaners
Canon USA recommends
replacing the Spiral Cleaners
when the machine is cool (at the
start of day/shift). If the machine
is warm, the operator or
technician must use heat-
resistant gloves. Replace when
instructed.
Cut the TTF Sheet Cleaners
As required
Replace the Light Weight Media Kit Air
Filter Set
Replace Oil Rollers (Oilfeed Rollers)
Print Guard customers only
Replace Cleaning Webs (Cleaning Set)
Replace the Fuser Oil Containers
Table 40 – Key Operator Cleaning
Action
KOM
eKOM
Remarks
Clean the OPC Belt (Left / Right)
Clean the Glue Cleaning rollers
Clean the TTF Unit
Clear paper Jams from the Process
Modules
Cut off the TTF Sheet Cleaners
Clean the Fusing Rollers
Print Guard customers only
Empty the Waste Reservoir
Clear Paper Jams Inside the Fusing Unit
Table 41 – Key Operator Registration Adjustment
Action
KOM
eKOM
Remarks
Registration Adjustment
(When replacing the OPC Belt or TTF
Belts)