Canon varioPRINT 600 TITAN Series, Service Manual, Page: 74 / 87

Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series Service Guide April 2021
Revision 1 Page 68
Table 59 – GBC Power Punch Specifications
Item Specifications
Paper Size
LTR, Tab Paper (9” x 11”), 11” x 17” (short-edge only)
Paper Weight
16 lb bond to 140 lb Index (60 g/m
2
to 250 g/m
2
)
Standard Punching Dies
•
2 or 4 holes round: loose leaf
•
3, 5, or 7 holes round: loose leaf
•
19, 20, 21 holes rectangular: plastic comb
•
23 holes round (2 holes/inch): wire
•
34 holes round (3 holes/inch): wire
•
47 holes round (4 holes/inch): plastic coil
Output Capacity Stacks up to 2,500 sheets
79
Power Source
115V AC, 50 to 60 Hz, 7 A
Dimensions (H x W x D) 44.9” x 81” x 32” (1,140 mm x 2,055 mm x 815 mm)
Weight Approximately 890 lb (403 kg)
Table 60 – Light Weight Media Kit-A1 Specifications
Item Specifications
Description
The Light Weight Media module makes it possible for customers to
produce unique applications based on light weight media.
Paper Size
Same as print engine, including 350 mm x 500 mm size paper with
the
Flex PIM-A1
Paper Weight
Supports Paper Weights as low as 12 lb bond/30 lb text (45 g/m
2
)
Approved media only
73
Included and Excluded
Options
Included: Air Guide, PRU (Paper Receiving Unit), Air-control,
conditioning unit, and air-filter (at the back of the
engine), Mounting Kit, LWM Fuse Belt, and Wide Media
Fuse Roller
Excluded: Air Supply (provided by customer)
80
Air Supply
Requirements
at the
Customer Site
Air
Pressure
Minimum: 4 bar (58 psi)
Maximum: 8 bar (116 psi)
Air Supply
Rate
Approximately 200 L/min (7 CF/min)
Air Quality
Class
Approximately 7:4:4, as defined in the ISO 8573-1:2010 standard
Physical
connection
•
10mm Festo air tube (outside diameter)
•
Connection point is at the LWM air filter unit (rear side of the
HCS2)
•
The compressed air supply must be connected by means of a
quick-connect coupling, or provided with an accessible manual
shut-off valve, located within 5 ft (1.5 m) from the connection
point (LWM air filter unit).
73 Refer to the Approved Media List VP6xx0 line February 2018 or later or the varioPRINT 6xx0 Line
Specialty Media Handling Guide version 3.0 or later for approved media.
79 An optional bypass stacker provides an additional stacking capacity of 2,500 sheets.
80 The air filter requires pressurized air. If pressurized air is not available, the customer must purchase an air pump. (Not included
in the Light Weight Media Kit)