Canon varioPRINT 600 TITAN Series, Service Manual, Page: 12 / 87

Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series Service Guide April 2021
Revision 1 Page 6
Table 7 – DFS30-N Tape Binder
Item Item Number
1
DFS30-N (Letter, 120 V AC 60 Hz)
17
,
18
5432B002AA
Letter Black Cartridge (Carton) 7629B032AA
1 Item Numbers and Part numbers are subject to change without notice.
Table 8 – BLM6200 Booklet Maker and Accessories
Note : The BLM6200 Booklet Maker was formerly named the BLM200 Booklet
Maker.
Item Item Number
1
BLM6200 Booklet Maker with Starter Kit
19, 20
3692V438
Rotator Transport Module 3692V439
BLM6200 Face Trimmer
21
3692V440
Square Spine Module 3692V442
Powerstacker
22
3858V479
Staple Cartridge (5000/CTR) for BLM6200 7621B333AA
1 Item Numbers and Part numbers are subject to change without notice.
Table 9 – Booklet Maker and Accessories
Item Item Number
1
Plockmatic Booklet Maker Set
19, 20, 23
3166B066AA
BLM5X0 Book Stacker-B1 3666V553
P2T 2-Knife Trimmer for BLM500 series
P2T 2-Knife Trimmer for series
24, 25
3166B071AA
P2T 2-Knife Trimmer connection kit Book Stacker with BLM500 series
Configuration Kit (P2T & PBS configuration)
26
3666V556
GUI Pivot Arm Kit for (P2T & PBS configuration)
27
3666V555
Trimming Conveyor (P2T & PBS configuration)
28
7603BD33AA
Supplies
Stitcher Wire S33 for the BLM500/550 3666V557
1 Item Numbers and Part numbers are subject to change without notice.
17 Requires DFD2 at iHCS for Online Finisher (5414B001AA, quantity 1) and R-sided docking at iHCS (5416B001AA, quantity 1),
and Lower Output Tray-B1 for iHCS (2429C020AA, quantity 1).
18 Dedicated Service Training is required (No charge) for the purchase of DFS30-N.
19 Requires DFD2 at iHCS for Online Finisher (5414B001AA, quantity 1) and R-sided docking at iHCS (5416B001AA, quantity 1).
20 Dedicated Service Training is required (No Charge)
21 Recommended for jobs over 8 sheets.
22 Requires the Square Spine Module.
23 Includes BLM550 Bridge and Bridge Cover.
24 Includes 2-Knife Trimmer for BLM500 series (Watkiss P2T), P2T/PBS Interface Kit for BLM, and Transformer for Watkiss P2T
25 Dedicated Service Training is required (Fee based) for the purchase of Watkiss P2T 2-Knife
26 Required Configuration Kit when installing the BLM5X0 Book Stacker and Watkiss P2T 2-Knife Trimmer.
27 Mounts the User Interface on a pivoting arm, for easier access when the Book Stacker and Watkiss P2T 2-Knife
Trimmer are attached.
28 Conveys the waste trimmings from the Watkiss P2T 2-Knife Trimmer into a collecting box in the base of the Book Stacker.Not
compatible with the Book Stacker Release 1.