
Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series
Service Guide
April 2021
Revision 1
Page 29
4. Watkiss P2T 2-Knife Trimmer for Training Course
To service the optional Watkiss P2T 2-Knife Trimmer, service technicians
must complete the Watkiss P2T 2-Knife Trimmer for the
comprehensive blended learning program, includes a 3-day Hardware
classroom course.
Note
: Service Technicians must successfully complete the Plockmatic
BLM 550+ training.
Table 24 – Watkiss 2-Knife Trimmer Training Course
Course Name
Course Code
Watkiss P2T 2-Knife Trimmer for Online Training
19DDSP2T500O
Watkiss P2T 2-Knife Trimmer Classroom
19DDSP2T501C
Item Numbers and Part Numbers are subject to change without notice.
5. GBC PowerPunch Online Training
To service the GBC PowerPunch with the varioPRINT 6000 TITAN Series
machines, service technicians must complete the Finishing Equipment
(GBC PowerPunch) online training course.
Table 25 – GBC Power Punch Online Training
Module Name
Course Code
Finishing Equipment [GBC PowerPunch] Online Training
21DDSFEGBCO
Item Numbers and Part Numbers are subject to change without notice.
6. BGB3202 Perfect Binder Training Program
To service the BGB3202 Perfect Binder with the varioPRINT 6000 TITAN
Series machines, service technicians must complete the BGB3202 training
program.
The BGB3202 training program is conducted during the installation of the
BGB3202 at the customer site. The training program will prepare the
service technicians to install and maintain the BGB3202. The training and
installation activity is approximately five (5) days.
Notes:
•
The customer must be informed of the installation/training time.
•
Additional technicians can be trained at the customer site provided the
customer is informed and is in agreement.
The dealership must contact Canon USA Hardware Engineering via the
Technical Support Center to arrange installation and training.