Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series
Service Guide
April 2021
Revision 1
Page 42
2. Temperature Gradient
If a sudden temperature change occurs, it may have an adverse effect on
image positioning. Sudden temperature changes may cause the paper to
bend or contract, cause the machine to malfunction, and form
condensation. Every effort should be made to maintain consistent
temperature and humidity levels in the operating environment at all times
for the varioPRINT 6000 TITAN Series machines.
If a humidifier must be used to regulate the humidity, use one that has a
mineral filter on it.
3. Ventilation
Ensure that there is a room volume of at least 2,649 ft
3
(75 m
3
) and an air
exchange rate of at least 300 m
3
per hour, in the location where the
machine will be installed.
4. Optimal Elevation
Install this machine at an elevation below 3,280.8’ (1,000 m)
(898.7 hPa)
for optimal machine performance.
5. Lighting
Canon USA recommends installing the machine in a location with at least
500 lux of lighting 29 1/2” (750 mm) above the floor for normal operations
and maintenance.
6. Sunlight
Avoid installing the machine in direct sunlight. Direct sunlight has adverse
effects on toner consistency and image quality. If direct sunlight is
unavoidable, use curtains to shade the machine. Make sure that the
curtains do not block the machine’s ventilation slots or louvers, or interfere
with the electrical cord or power supply.