Canon varioPRINT 600 TITAN Series, Service Manual, Page: 10 / 87

Canon
varioPRINT 6000 TITAN Series Service Guide
varioPRINT 6000 TITAN Series Service Guide April 2021
Revision 1 Page 4
Table 2 – Mandatory Accessories
Item Item Number
1
Paper Input Module (Must select one)
Paper Input Module Standard-B1 2429C010AA
Paper Input Module Flex-A1 (Additional are optional) 2429C013AA
High Capacity Stacker (Must select one, additional are optional)
High Capacity Stacker 2.1 with Top Cover-B2 2429C015AA
High Capacity Stacker 2.1 with Set Finisher-B2
7
2429C024AA
Power Supply (Must select one)
208/240V AC, 3-phase, 30 A (Receptacle: L15-30R) 8221B009AA
208/240V AC, Single Phase 50 Amp (Receptacle: 14-50R) 8221B012AA
1 Item Numbers and Part numbers are subject to change without notice.
Table 3 – Hardware Accessories
Item Item Number
1
Paper Input Module Optional-B1 2429C011AA
Paper Input Module Flex-A1 2429C013AA
Duo Paper Tray-C1
8
8117B002BA
Statement Size (7” x 10” Option) for Paper Input Module
8
5389B001AA
Form Assist Module II 5388B002AA
Additional High Capacity Stacker with Top Cover-B2 2429C022AA
ICMU-B1 2429C004AA
Light Weight Media Kit-A1
9
2429C019AA
Media Enhancement Module
10
2429C006AA
DFD2 at iHCS for Online Finishing
11
5414B001AA
R-sided docking at iHCS 5416B001AA
Lower Output Tray for IHCS
12
2429C020AA
Powerlift-A1 (includes 5 pallets) 5418B002AA
Additional Pallets for Powerlift (5 pallets) 5461B001AA
Copy Control Interface (VP6000) 5403B001AA
Controller Locker Cabinet-B1 2429C002AA
Aluminum Floor Protection (6 mm x 980mm x 748 mm)
13
8221B008AA
1 Item Numbers and Part numbers are subject to change without notice.
7 Includes High Capacity Stacker 2.1, VP6000 Finisher-B2, VP6000 CRU-B2, and Additional items Finisher for iHCS2.
8 Option for Standard/Optional Paper Input Module-B1 Only. Not supported in Paper Input Module Flex-A1.
9 The TP TITAN and MICR TITAN do not support the Light Weight Media Kit-A1.
10 Available for standard varioPRINT 6000 TITAN digital press Models only, not supported for the TP and MICR Models. Cannot
be installed on units with Print Guard IV.
11 Required when finishing options are connected.
12 Required when DFS30-N Tape Binder or SDD BGB3202 Perfect Binder is connected.
13 Must order a minimum of two (2).