Canon TS8000 series Online Manual Download Page 51

Page: 51 / 497

• To load A4 or Letter-sized paper in the cassette, press down the lock (H) on the cassette, then

extend the cassette.

6. Align the paper guide (I) in front with the paper stack.

Align the paper guide (I) with where it clicks into place.

7. Slide the paper guide (J) on the right to align the right and left guides with both sides of the

paper stack.

Do not slide the paper guides too hard against the paper. The paper may not be fed properly.

Note

• Do not load sheets of paper higher than the load limit mark (K).
• Keep the paper stack height below the tabs (L) of the paper guides.

8. Mount the cassette cover, and then insert the cassette into the printer.

Summary of Contents for TS8000 series


















































































































































































































































































































































































































































































































Search results

Summary of Contents for TS8000 series

Reviews:

Brands by name

Popular brands

Canon TS8000 series, Online Manual

Search results

Summary of Contents for TS8000 series

Reviews:

Brands by name

Popular brands