manualshive.com logo in svg

Canon TS3300 Series, Online Manual

Share
Download
Canon TS3300 Series Online Manual Download Page 74

Checking the Ink Status with the Ink Lamps on the Operation
Panel

Note

• The ink level detector is mounted on the printer to detect the remaining ink level. The printer considers

as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink level. If
you install a used FINE cartridge, the indicated ink level of it may not be correct. In such case, refer to
the ink level information only as a guide.

• When remaining ink cautions or errors occur, the ink lamps and the 

Alarm

 lamp will flash to inform you

of the error. Also the error code is displayed on the LCD. Check the error code and take appropriate
action.

When Error Occurred

In the copy standby mode, you can check the ink status with the 

Color Ink

 lamp and 

Black Ink

 lamp.

* All the lamps on the operation panel are shown lit in the figure below for explanatory purposes.

A: 

Alarm

 lamp

B: 

Black Ink

 lamp

C: 

Color Ink

 lamp

Color Ink lamp or Black Ink lamp lights

The ink is running low. Prepare a new ink cartridge. The resulting print quality may not be satisfactory, if
printing is continued under this condition.

Color Ink lamp or Black Ink lamp flashes, while Alarm lamp flashes

An error has occurred.

When Error Occurred

* For some types of errors, the 

Alarm

 lamp may not flash.

Note

• You can also check the ink status on the computer screen.

For Windows:

Checking Ink Status from Your Computer

For macOS:

Checking Ink Status from Your Computer

74

Summary of Contents for TS3300 Series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands