Canon TS3300 Series Online Manual Download Page 302

Page: 302 / 305

5100

Cause

Printer error has occurred.

What to Do

If you are printing, press the printer's

Stop

button to cancel printing, then turn off the printer.

Check the following:

• Make sure FINE cartridge holder motion is not impeded by stabilizer, jammed paper, etc.

Remove any impediment.

Important

• When clearing an impediment to FINE cartridge holder motion, be careful not to touch clear film

(A).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

• Make sure the FINE cartridges are properly installed.

Push up the FINE cartridge until it clicks into place.

Turn the printer back on.

If this does not solve the problem, contact your nearest Canon service center to request a repair.

302

Summary of Contents for TS3300 Series


















































































































































































































































































































Search results

Summary of Contents for TS3300 Series

Reviews:

Brands by name

Popular brands

Canon TS3300 Series, Online Manual

Search results

Summary of Contents for TS3300 Series

Reviews:

Brands by name

Popular brands