Canon TS3300 Series Online Manual Download Page 274

Page: 274 / 305

Check4

When printer is connected to your computer with a USB cable, check device

status from your computer.

Follow the procedure below to check the device status.

1. Select

Control Panel

Hardware and Sound

Device Manager

Note

• If the

User Account Control

screen appears, select

Continue

2. Open

USB Printing Support Properties

Double-click

Universal Serial Bus controllers

and

USB Printing Support

Note

• If

USB Printing Support Properties

screen does not appear, make sure the printer is

correctly connected to the computer.

Check2

Make sure printer is properly connected to computer.

3. Click

General

tab and check for a device problem.

If a device error is shown, see Windows Help to resolve it.

Other Error Messages (Windows)

Check

If an error message appears outside printer status monitor, check the

following:

• "

Could not spool successfully due to insufficient disk space

Delete any unnecessary files to increase the amount of free space on the disk.

• "

Could not spool successfully due to insufficient memory

Close other applications to increase the available memory.

If you still cannot print, restart your computer and retry the printing.

• "

Printer driver could not be found

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.

• "

Could not print Application name

- File name"

Try printing again once the current job is complete.

274

Summary of Contents for TS3300 Series


















































































































































































































































































































Search results

Summary of Contents for TS3300 Series

Reviews:

Brands by name

Popular brands

Canon TS3300 Series, Online Manual

Search results

Summary of Contents for TS3300 Series

Reviews:

Brands by name

Popular brands