manualshive.com logo in svg

Canon TS3300 Series, Online Manual

Share
Download
Canon TS3300 Series Online Manual Download Page 273

Message (Support Code) Appears

This section describes some of the messages that may appear on the computer screen.

Note

• A support code (error number) is displayed on the computer for some errors. For details on errors that

have support code, see 

List of Support Code for Error

.

Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)

Error Regarding Power Cord Being Unplugged Is Displayed

(Windows)

The printer may have been unplugged while it was on.

Check the error message that appears on the computer and click 

OK

.

The printer starts printing.

See 

Unplugging the Printer

 for unplugging the power cord.

Writing Error/Output Error/Communication Error (Windows)

Check1

 If the 

ON

 lamp is off, make sure printer is plugged in and turn on.

The 

ON

 lamp flashes while the printer is initializing. Wait until the 

ON

 lamp stops flashing and remains lit.

Check2

 Make sure printer is properly connected to computer.

If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the printer over a LAN, make sure the printer is correctly set up for network use.

Check3

 Make sure MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall them from the Setup CD-ROM or the Canon website.

273

Summary of Contents for TS3300 Series


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands