manualshive.com logo in svg

Canon Speedlite EL-5, Advanced User'S Manual

Share
Download
Canon Speedlite EL-5 Advanced User'S Manual Download Page 89

Radio Transmission Wireless Flash Photography

This chapter describes radio transmission wireless flash photography using sender and
receiver functionality.
For details on Speedlites compatible with this wireless flash photography, refer to the
Supplemental Information (

).

Caution

Operations described in this chapter are not available when the camera is in Full
Auto or Basic Zone modes. Set the camera's shooting mode to <

>, <

>,

<

>, <

>, <

>, or <

Bulb

 (

)> (Creative Zone).

When it is important to maintain the wireless connection, do not operate the power
switch or move parts such as the battery compartment cover. The wireless
connection will be terminated.

Note

The EL-5 attached to the camera is referred to as a “sender,” and other Speedlites
controlled wirelessly are referred to as “receivers.”
The EL-5 also supports remote release (remote shooting) from a receiver (

). For

details, refer to the instruction manual of a Speedlite equipped with remote release
functionality.

•

Radio Transmission Wireless Flash Photography

•

Wireless Settings

•

Autoflash with One Receiver

•

Autoflash with Two Receiver Groups

•

Autoflash with Three Receiver Groups

•

Wireless Multiple-Flash Photography with Flash Ratio

•

Shooting in Group-Specific Flash Modes

•

Firing Test Flash/Modeling Flash from Receivers

•

Remote Release from Receivers

•

Linked Shooting

89

Summary of Contents for Speedlite EL-5

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands