manualshive.com logo in svg

Canon Speedlite EL-5, Advanced User'S Manual

Share
Download
Canon Speedlite EL-5 Advanced User'S Manual Download Page 158

P.Fn-03: 

 (Change settings with dial)

You can select whether to allow direct configuration of the kinds of functions shown in the
lower figure simply by turning <

> on screens such as this one that are accessed by

pushing the joystick straight in.

0: OFF (Disabled)

Normal method of operation.

1: ON (Enabled)

Enables selection of setting items (for the flash exposure compensation amount, manual
flash output, firing group control, flash ratio, flash modes in group firing, receiver firing
groups, and FEB) with the joystick and direct configuration simply by turning <

>.

In <

> flash mode, flash frequency and flash count can be set directly.

Caution

To select a setting item on the setting screen when P.Fn-03 is set to [1], press the
joystick vertically or horizontally.

158

Summary of Contents for Speedlite EL-5

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands