manualshive.com logo in svg

Canon Speedlite EL-5, Advanced User'S Manual

Share
Download
Canon Speedlite EL-5 Advanced User'S Manual Download Page 25

Getting Started and Basic Operations

This chapter describes the preparations before starting flash photography and the basic
shooting operations.

Caution

Precautions on continuous flash firing

To avoid wearing out or damaging flash heads from overheating, do not fire the
flash continuously at full output more than approx. 40 times. After firing
continuously at full output this many times, stop using the Speedlite for at least 40
min.
After continuous firing at full output this many times, further continuous firing at
short intervals may activate a safety function that restricts firing. At a firing
restriction level of 1, the firing interval is automatically set to approx. 8 sec. In this
case, stop using the Speedlite for at least 40 min.
For details, see 

Flash Firing Restriction Due to Temperature Increase

.

•

Charging the Battery

•

Inserting the Battery

•

Attaching and Detaching the Speedlite

•

Turning on the Power

•

Fully Automatic Flash Photography

•

E-TTL II / E-TTL Autoflash, by Shooting Mode

•

Checking Battery Information

25

Summary of Contents for Speedlite EL-5

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands