6.
Set the flash mode.
Press the joystick vertically or horizontally or turn <
> to select the
flash mode, then push the joystick straight in.
Descriptions next to <
>–<
> vary depending on the registered
settings.
For details on Custom flash modes, see
7.
Set the transmission channel and wireless radio ID.
Setting the Transmission Channel / Wireless
8.
Set up shooting on the camera.
9.
Set up all Speedlites.
In the linked shooting setting, set up all Speedlites you will use in linked
shooting as senders or receivers.
Do the same for any transmitters you will use.
Changing a Speedlite from receiver to sender in step 3 automatically
changes other Speedlites (or transmitters) that were set as senders to
receivers.
10.
Position the receiver cameras.
Position all receiver cameras within approx. 30 m / 98.4 ft. of the
sender camera.
Confirm that the <
> lamp of receivers is lit in green.
142
