manualshive.com logo in svg

Canon Speedlite EL-5, Advanced User'S Manual

Share
Download
Canon Speedlite EL-5 Advanced User'S Manual Download Page 176

Caution

Do not open or close the battery compartment cover while flash firing is restricted.
This will cancel the flash firing restriction, which is potentially very dangerous.
The firing interval becomes longer as the flash head becomes hotter, even if no
level 1 warning is displayed.
After a level 1 warning appears, stop using the Speedlite for at least 40 min.
Even if you stop firing after a level 1 warning appears, a level 2 warning may still be
displayed.
Flash photography in <

> flash mode or in high temperatures may restrict

the flash count sooner than indicated in the table.
For flash count precautions, see 

Precautions on continuous flash firing

,

Stroboscopic Flash

, and 

Modeling Flash

.

In rare cases, environmental factors such as high temperatures may prevent firing.
The Speedlite does not issue a warning beep when P.Fn-05 is set to [1] (

), even

when firing is restricted.
No warning is given by LCD panel illumination when C.Fn-22 is set to [1] (

), even

if the flash head becomes hot.

176

Summary of Contents for Speedlite EL-5

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands