Canon Speedlite EL-5 Advanced User'S Manual Download Page 120

Page: 120 / 192

Check the connection and make sure the flash units are charged.

Confirm that the <

> lamp is lit in green.

Confirm that the sender and receiver flash-ready lamps are lit.

The sender beeps after all Speedlites have been recharged when
P.Fn-05 is set to [0] (

Make sure <

> is not displayed on the sender LCD panel.

Confirm that the <

> icon indicating completion of sender/receiver

charging appears on the sender LCD panel (<

> is not

displayed).

For details on sender LCD panel illumination, see

LCD Panel

Illumination

Take the picture.

The receivers fire at the flash ratio you have set.

120

Summary of Contents for Speedlite EL-5

































































































































































































Search results

Summary of Contents for Speedlite EL-5

Reviews:

Related manuals for Speedlite EL-5

Brands by name

Popular brands

Canon Speedlite EL-5, Advanced User'S Manual

Search results

Summary of Contents for Speedlite EL-5

Reviews:

Related manuals for Speedlite EL-5

Brands by name

Popular brands