Continuous Flash Count and Rest Time
The following table shows the estimated continuous flash count until level 1 warning display,
along with the estimated rest time required until normal flash photography can be resumed.
Function
Estimated Continuous Flash Count
Until Level 1 Warning
Estimated Rest Time
Required
Flash Coverage
14 mm
*
1, 24 mm–28 mm
35–200 mm
Continuous, at full output
(
40 times or more
85 times or more
At least 40 min.
Modeling flash
(
Stroboscopic flash
Varies depending on firing conditions
-
* As measured in manual flash mode according to Canon testing standards.
* Using a new, fully charged Battery Pack LP-EL
* 1: When using the wide panel
Caution
Do not touch the flash head, battery, or near the battery compartment after
continuous flash firing.
After repeated use of continuous flash or modeling flash at short intervals, do not
touch the flash head, battery, or near the battery compartment. The flash head,
battery, and area near the battery compartment may become hot, which poses a
risk of burns.
175
