Canon PowerShot SXE60 HS Page 60 Getting Started Download

Page: 60 / 293

Trying the Camera Out

To access Scroll Display mode, turn the

dial rapidly. In this mode, turn the

dial to

browse through images.

To return to single-image display, press the

button.

To browse images grouped by shooting date,
press the

buttons in Scroll Display

mode.

Movies are identified by a

icon. To play

movies, go to step 3.

Play movies.

Press the

button, choose

(either

press the

buttons or turn the

dial),

and then press the

button again.

Playback now begins, and after the movie is
finished,

displayed.

To adjust the volume, press the

buttons.

You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.

Choose an image to erase.

Press the

buttons or turn the

dial to

choose an image.

•

To switch to Shooting mode from Playback mode, press the shutter button
halfway.

Erasing the Images

Summary of Contents for PowerShot SXE60 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE60 HS

Reviews:

Related manuals for PowerShot SXE60 HS

Brands by name

Popular brands

Canon PowerShot SXE60 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE60 HS

Reviews:

Related manuals for PowerShot SXE60 HS

Brands by name

Popular brands