Canon PowerShot SXE60 HS Getting Started Download Page 208

Page: 208 / 293

172

Save a copy of images at a lower resolution.

Choose [Resize].

Press the

button, and then choose

[Resize] on the

tab (p. 40).

Choose an image.

Press the

buttons or turn the

dial to

choose the image, and then press the

button.

Choose an image size.

Press the

buttons or turn the

dial to

choose the size, and then press the

button.

[Save new image?] is displayed.

Save the new image.

Press the

buttons or turn the

dial to

choose [OK], and then press the

button.

The image is now saved as a new file.

Review the new image.

Press the

button. [Display new

image?] is displayed.

Press the

buttons or turn the

dial to

choose [Yes], and then press the

button.

The saved image is now displayed.

Editing Still Images

•

Image editing (pp. 172 – 177) is only available when the memory
card has sufficient free space.

Resizing Images

Still Images

Summary of Contents for PowerShot SXE60 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE60 HS

Reviews:

Canon PowerShot SXE60 HS, Getting Started, Page: 208 / 293

Search results

Summary of Contents for PowerShot SXE60 HS

Reviews: