manualshive.com logo in svg

Canon PowerShot SXE60 HS, Getting Started, Page: 184 / 293

Share
Download
Canon PowerShot SXE60 HS Getting Started Download Page 184

Viewing

148

If you switch the camera to simple information display mode (see below), the 
names of up to five detected people registered in Face ID (p. 69) will be 
displayed.

Switch to simple information 
display mode and check.

z

Press the 

l

 button repeatedly until 

simple information display is activated, and 
then press the 

qr

 buttons or turn the 

5

 dial 

to choose an image.

X

Names will be displayed on detected people.

Press the 

l

 button to view other information on the screen, or to hide the 

information. For details on the information displayed, see p. 226.

*Not shown for movies.

Checking People Detected in Face ID

Still Images

•

If you do not want names to display on images shot using Face ID, press the 

n

 button, choose [Face ID Info] on the 

1

 tab, and then set [Name Display] 

to [Off].

Switching Display Modes

Still Images

Movies

Enables you to 

check the focus 

(p. 150)

*

Detailed 

Information Display

No information is 

displayed

Simple Information 

Display

Summary of Contents for PowerShot SXE60 HS






































































































































































































































































































Reviews:

No comments