Canon PowerShot SXE60 HS, Getting Started

Page: 261 / 293

On-Screen Messages
225
Exceeded selection limit
• More than 998 images were selected for Print List (p. 210) or Photobook Set-up
(p. 214). Choose 998 images or less.
• Print List (p. 210) or Photobook Set-up (p. 214) settings could not be saved correctly.
Reduce the number of selected images and try again.
• You attempted to choose more than 500 images in Protect (p. 159), Erase (p. 163),
Favorites (p. 167), My Category (p. 168), Print List (p. 210), or Photobook Set-up
(p. 214).
Communication error
• An excessive amount of images (approx. 1,000) on the memory card prevented printing
or image transfer to a computer. To transfer the images, use a commercially available
USB card reader. To print, insert the memory card directly into the printer card slot.
Naming error!
• When the highest folder number (999), and the highest image number (9999) has been
reached, new folders cannot be created, and images cannot be recorded. In the
3
menu, change [File Numbering] to [Auto Reset] (p. 187), or format the memory card
(p. 185).
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
A camera error was detected ( error number )
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case, write
down the error number (
Exx ) and contact a Canon Customer Support Help Desk.
File Error
• It may not be possible to print computer-edited images or images shot with another
camera.
Print error
• Check the paper size setting. If this error message is displayed when the setting is
correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink absorber
replacement.