Canon PowerShot SXE60 HS, Getting Started, Page: 179 / 293

Specific Shutter Speeds and Aperture Values (M Mode)
143
Choose from the three flash levels in
D
mode.
Enter
D
mode.
z
Set the mode dial to
D
.
Configure the setting.
z
Press the
m
button, choose
X
in the menu,
and adjust the setting by either pressing the
op
buttons or turning the
5
dial (p. 39).
•
D
: Manual
• Calculation of standard exposure is based on the specified metering method
(p. 117).
Adjusting the Flash Output
• You can also set the flash level by accessing
n
(p. 40) and choosing [Flash
Output] in [Flash Settings] on the
4
tab.
• You can set the flash level in
M
or
B
mode by accessing
n
(p. 40),
choosing [Flash Settings] on the
4
tab, and then setting [Flash Mode] to
[Manual].
• You can also access the [Flash Settings]
n
screen as follows.
- When the flash is up, press the
r
button and immediately press the
n
button.